Back to Articles

Article Rating:

EC3010 is a heat cured, black hybrid-polymeric epoxy based coating, developed to provide a tough and flexible seal around rare-earth magnets. The coating exhibits an excellent resistance to corrosion, has high adhesion, and outstanding resistance to abrasion. Below is a list of characteristics that makes this coating very desirable.

1. Corrosion Resistance
2. Abrasion Resistance
3. Chemical Resistance
4. Versatility

Typical Functional Performance 

Pencil Hardness	3H
Taber Abrasion
(CS-10 Wheel, 1 kg. Load, ASTM D-1044, D-51)	14.4 mg/1000 Cycles
Corrosion Resistance
Salt Spray, ASTM B-17 (Steel Q-panels, zinc phosphate, .5 mil film thickness, nominal)	500 Hours +
Chemical Resistance
Splash & Spillage	Pass
Fumes	Pass
Heat Resistance
Continuous Exposure	250°F
Intermittent (50% Duty)	250°F
Direct Impact Resistance
175 lb/in	Pass
Strength
Flextural	12,000 psi

Log on