Magnetic Component Engineering

SAE AS9100D AND ISO 9001:2015 CERTIFIED

1-310-784-3100

Contact Us

Technical Data Sheet - EC3010


EC3010 is a heat cured, black hybrid-polymeric epoxy based coating, developed to provide a tough and flexible seal around rare-earth magnets. The coating exhibits an excellent resistance to corrosion, has high adhesion, and outstanding resistance to abrasion. Below is a list of characteristics that makes this coating very desirable.

  1. Corrosion Resistance
  2. Abrasion Resistance
  3. Chemical Resistance
  4. Versatility

Typical Functional Performance

Pencil Hardness

3H

Taber Abrasion

(CS-10 Wheel, 1 kg. Load, ASTM D-1044, D-51)

14.4 mg/1000 Cycles

Corrosion Resistance

Salt Spray, ASTM B-17 (Steel Q-panels, zinc phosphate, .5 mil film thickness, nominal)

500 Hours +

Chemical Resistance

Splash & Spillage

Pass

Fumes

Pass

Heat Resistance

Continuous Exposure

250°F

Intermittent (50% Duty)

250°F

Direct Impact Resistance

175 lb/in

Pass

Strength

Flextural

12,000 psi

TDS:EC3010 Rev 1 (05/21/1997)